Product Overview:
Output: 250 up to 15,000kW
Number of Poles: 4 to 12
Cooling method: TEAAC & TEFC
Degree of Protection: IP54 to IP65
Frames: 355 up to 1250
Ambient temperature: 40 °C
Elevation: 1000m above sea level
Service factor: 1.0 @ 40 deg C ambient
Mounting: IM1001
Voltages: Up to 13,800V
Insulation Class: “F” insulation (ΔT = 80K)
Continuous duty: S1
Design: N
Thermal protection: As per customer specification
Bearings: Anti-friction Bearings , Sleeve bearings
Frame Material: Fabricated Steel
Color: As per customer specification
Options Available:
- Altitude above 1000 m (on request)
- Aluminum, copper or brass rotor
- Ambient temperature above 40 °C
- Base: rail, sliding base, extended feet, rebuilt feet, anchorage plate
- Bearing thermometer with gauge with/without contacts
- Brush Lifting System
- Cable gland in the terminal box entrance
- Class of insulation: H
- Cooling: Forced ventilated, Air-to-water heat exchanger
- CT for differential and integral protection
- Electrically insulated bearing
- Encoder
- Grounding brush on drive end bearing
- Independent hydraulic oil circulation system for sleeve bearing
- Mountings: Vertical, Horizontal, Foot and Flange, Flange,
- NEMA Standard
- Noise suppressor in the air inlet and outlet
- Non-reversion ratchet
- Multiple accessory terminal boxes
- Power factor correction capacitors
- Protection against voltage surge: Lighting arrestors and Capacitors
- Service Factor: 1.15
- Shaft: Special dimensions, double shaft end, tapered, hollow, special steel
- Signal transducer
- Sleeve bearing
- Special balance
- Special bearing (overdesigned) for axial or radial thrust
- Special painting
- Steel welded terminal box in different sizes, based on internal available space
- Temperature detector: Thermistor (PTC or NTC)
- Temperature detector: Thermostat (Bimetallic)
- Two energized power terminal boxes
- Vibration detector
